Telescoping Flagpole (120.111) Help

Installation & Materials Required
Half-Staffing

Installation & Materials Required

Telescoping flagpole PVC sleeve (included)
Approximately three 60-lb bags of concrete mix
Measuring tape or yard stick
Contractor’s level
Small rock or coarse gravel container for mixing concrete

Dig a hole 28” deep by 12” round and place 6” of small gravel for drainage on the bottom of the hole. Insert bolt in sleeve. Place sleeve in hole. Surround sleeve with cement, place level on top of the sleeve to see that it is level. Set and cure overnight.

*Detailed installation instructions are included with the flagpole.

Return to Top

Half-Staffing

To half-staff using the telescoping flag pole, move the flag from the top position to the bottom, second-flag position. In addition, to enhance the effect, you may also lower your pole one position to reduce its height.

Return to Top